SunPro® Pre Engineering Building Insulations Material is versatile range of high performance fibre-free flexible reflective insulation for roofs, walls and floors. SunPro® fibre-free flexible Pre Engineering Building Insulationsoffers the following benefits for your building insulation:
Our range of Pre Engineering Building Insulations products include Radiant Barriers or Reflective Barriers such as Woven Sack Lamination With Aluminium Foil, Aluminium Foil Metalized Film Laminated Non Woven Fabrics, Foil Kraft Insulation Finish, Insulation Aluminum Foil Coated Fiberglass Cloth and Metalized Laminated With Woven Fabrics, Which Used in Below application.
An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.
Property(Grammage) | Test Method(ISO 536) | Unit(g/sqm) | Results(120–190 (+/-5%)) |
Tensile–MD and CD | AS 4200.1 | N/50mm | 350 – 400 and100 –200 |
Elongation – MD and CD | AS 4200.1 | % | 15 ±5 |
Force at break – MD and CD | ASTM D 2261 | N | 100±20 |
Water Vapour – transmission rate | ASTM F 1249 | g/m2/day | <1 |
Emittance of surface Aluminium foil | ASTM E 408 | % | 97±2 |
Working Temperature Range | - | Celsius | -50 to 110 ´C |
SunPro® Manufactured Pure Aluminium Foil Insulations is economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation ,under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products
Panel Insulations Material Materials like SunPro® AWA&AW Technical Specifications:
moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.
Property(Grammage) | Test Method(ISO 536) | Unit(g/sqm) | Results(150–190 (+/-5%)) |
Tensile–MD and CD | AS 4200.1 | N/50mm | 350 – 400 and100 –200 |
Elongation – MD and CD | AS 4200.1 | % | 15 ±5 |
Force at break – MD and CD | ASTM D 2261 | N | 100±20 |
Water Vapour – transmission rate | ASTM F 1249 | g/m2/day | <1 |
Emittance of surface Aluminium foil | ASTM E 408 | % | 97±2 |
Working Temperature Range | - | Celsius | -50 to 110 ´C |
Panel Insulations Material are economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation ,under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products
Metal Building Insulations Materials Like SunPro® AWA&AW Technical Specifications An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high
moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.
Property(Grammage) | Test Method(ISO 536) | Unit(g/sqm) | Results(110–140 (+/-5%)) |
Tensile–MD and CD | AS 4200.1 | N/50mm | 350 – 400 and100 –200 |
Elongation – MD and CD | AS 4200.1 | % | 15 ±5 |
Force at break – MD and CD | ASTM D 2261 | N | 100±20 |
Water Vapour – transmission rate | ASTM F 1249 | g/m2/day | <1 |
Emittance of surface Aluminium foil | ASTM E 408 | % | 97±2 |
Working Temperature Range | - | Celsius | -50 to 110 ´C |
Metal Building Insulations Materials are economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products
Thermal Insulations For Building Materials like SunPro® ANWA are Reflects most of radiation heat (blocks 97% of radiation heat)
Thermal Insulations For Building, Apply Nonwoven fabric which is a fabric-like material made from long fibbers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.
Thermal Insulations For Building Materials are light in weight, excellent tear-resistance & good puncture resistance & excellent water vapour resistance and higher tensile strength. It is easy to handle during construction. anti-aging, peel strength, and printable
Thermal Insulations For Building are used widely to make car cap to Reflective Sunshine & in Roof, floor, wall, pack food for heat retaining, medical & sanitary, industry & agriculture, construction & daily-used products such as the agricultural plant covers, roof waterproof material, disposable items for medical and industrial applications, liners for furniture, packing material, shopping bags, suit and garment cover, industrial protective coveralls, garment accessory materials, bed articles, medical and sanitary articles as well as family and hotel consume articles, especially for heat insulation, thermal insulation and construction and other fields.
Metalized film / Al Foil Laminated non woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage, well tensile strength, aluminium coating is well-proportioned has very high lusted degree, light reflectivity reach 98%, suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging...
Radiant Barrier For Under Deck Insulations like SunPro® ANW & SunPro® ANWA are Reflects most of radiation heat (blocks 97% of radiation heat) . Apply Nonwoven fabric which is a fabric-like material made from long fibbers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.
Radiant Barrier For Under Deck Insulation is light in weight, excellent tear-resistance & good puncture resistance & excellent water vapour resistance and higher tensile strength. It is easy to handle during construction. Anti-aging, peel strength, and printable
Radiant Barrier For Under Deck Insulations Metalized film / Al Foil Laminated non woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage, well tensile strength, aluminium coating is well-proportioned has very high lusted degree, light reflectivity reach 98%, suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging...
Heat Resistance Insulation Foil like Light Weight Fibreglass Mesh Backed Foil Insulation Finish is Reflects most of radiation heat (blocks 97% of radiation heat)
Heat Resistance Insulation Foil Take light weight glass fibrous mesh (only 31gto 300 g) as backing and reflective aluminium foil or film as outer side, this foil mesh insulation jacketing SunPro® offer usually be installed for pipe insulation in automobile and so does to wall and roof insulation
By applying uniquely advanced compound processing and using fibreglass as the base cloth and special fire-resistant adhesive agent, our product has the excellent properties such as the smooth surface on the aluminium foil, strong light reflection, good stretching resistance in length and breadth, non-breath ability, non-breath ability, non-water permeability, good hermetic and weather resistance.
Heat Resistance Insulation Foil are 97% reflecting rate, could reflect most solar energy effectively and barrier radiant effectively; light weight will not add more burden to carrier; meanwhile fantastic durable because of glass fiber mesh is strong enough; will not corrupt by moisture because of 100% Inorganic raw materials was taken to produce it; pliable and tough flexible easy to be installed from any angle.
SunPro® Heat Resistance Insulations Foil are Foil mesh facer mainly be used in automobile for pipe insulation, and also in HVAC system, roofs, ceilings, walls, ducts and pipes, basements, water heaters, crawl spaces, and garages in all types of residential, industrial, commercial and agricultural buildings. And it works well in areas with cool, warm, hot, and humid climates.
Roofing Insulation Materials Like SunPro® MET PET BASED RADIANT BARRIER is Reflects most of radiation heat (blocks 97% of radiation heat).It is light in weight but excellent tear-resistance & good puncture resistance. It is easy to handle during construction. It is used widely to make car cap to reflective sunshine & in roof,floor,wall,pack food for heat retaining. This combination provides excellent water vapour resistance and higher tensile strength.
Roofing Insulation Material like SunPro® Radiant Barrier is economical solution for a wide range of industrial, manufacturing ,packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation ,under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products.
PEB Insulations Materials Reflects most of radiation heat (blocks 97% of radiation heat). It is light in weight but excellent tear-resistance & good puncture resistance. It is easy to handle during construction. It is used widely to make car cap to reflective sunshine & in roof,floor,wall,pack food for heat retaining. This combination provides excellent water vapour resistance and higher tensile strength.
PEB Insulations Material is economical solution for a wide range of industrial, manufacturing ,packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation ,under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products.
Radiant Barrier like Light Weight Fiberglass Mesh Backed Foil Insulation Finish are Reflects most of radiation heat (blocks 97% of radiation heat).Take light weight glass fibrous mesh (only 31gto 300 g) as backing and reflective aluminum foil or film as outer side, this foil mesh insulation jacketing SunPro® offer usually be installed for pipe insulation in automobile and so does to wall and roof insulation.
By applying uniquely advanced compound processing and using fibreglass as the base cloth and special fire-resistant adhesive agent, our product has the excellent properties such as the smooth surface on the aluminium foil, strong light reflection, good stretching resistance in length and breadth, non-breath ability, non-breath ability, non-water permeability, good hermetic and weather resistance.
SunPro® Radiant Barrier are 97% reflecting rate, could reflect most solar energy effectively and barrier radiant effectively; light weight will not add more burden to carrier; meanwhile fantastic durable because of glass fiber mesh is strong enough; will not corrupt by moisture because of 100% Inorganic raw materials was taken to produce it; pliable and tough flexible easy to be installed from any angle.
Radiant Barrier Foil mesh facer mainly be used in automobile for pipe insulation, and also in HVAC system, roofs, ceilings, walls, ducts and pipes, basements, water heaters, crawl spaces, and garages in all types of residential, industrial, commercial and agricultural buildings. And it works well in areas with cool, warm, hot, and humid climates.