-
+91 7383115721
Metallised films (or metalized films) Extrusions Coating / Multi Ply Laminations: M/S, Patels Poly Pack was started in 2016 for the manufacture and marketing of Metallised films (or metalized films) based packaging. The company is equipped with Latest Extrusion laminations of Metallised films (or metalized films) with paper,board and various plastic films. Beside they do have in-house Auxiliaries facility. M/S, Patels Poly Pack has the capacity for processing 100 Tons of Metalized in assorted thickness a month.
Our range of Mobile House Insulations products include Radiant Barriers or Reflective Barriers such as Woven Sack Lamination With Aluminium Foil, Aluminium Foil - Metalized Film Laminated Non Woven Fabrics, Foil Kraft Insulation Finish, Insulation Aluminum Foil Coated Fiberglass Cloth and Metalized Laminated With Woven Fabrics, Which Used in Below application
Packaging Both metallised PET and PP have replaced foil laminates for products such as snack foods, coffee and candy, which do notrequire the superior barrier of aluminium foil. Metallised nylon and polyethylene are used in the meat export market. The controlled permeation extends shelf life.
Metallised films are used as a susceptor for cooking in microwave ovens. An example is a microwave popcorn bag. Many food items are also packaged using metallised films for appearance only, as these produce a package with greater sparkle when compared to competing products that use printed paper or polymer films.
Metallised PET films are used in NASA´s spacesuits to make them radiation resistant and keep astronauts warm, and in proximity (aluminized) suits are used by AR-FF fire fighters for protection from the high amount of heat released from fuel fires. Silvered emergency blankets are also used to conserve a shock victim's body heat. These reflective materials might also be used as part of industrial and commercial insulation (for example, insulated shipping containers.) Insulating blankets made with Metallised PET were also used as insulation in aircraft until safety concerns resulted in their deprecation.[5] In particular, it was found to be a major cause of the in-flight fire of Swissair Flight 111 on September 2, 1998.
| Composed of | Characteristics | Application | |
| Al foil with LDPE coating | Pure Al foil : >12 mic LDPE coating :>20 mic |
•Easy to burn •Good elongation •Poor embossing performance |
• Camping mat • Thermal insulation for construction • Heat Lamination for Foam Insulations |
| Al foil with LDPE coating | Pure Al foil :>09 mic LDPE coating : >20 mic |
Strong at high temperature Good embossing performance |
•Camping mat •N.P.E foam pipe cover •Lamination for Air Bubble Insulations |
| Real Aluminum foil with LDPE coating | Aluminium foil : >7.5 mic LDPE coating : >20 mic |
•Flame resistance •Excellent embossing performance •Long lasting printing |
•X.L.P.E foam pipe cover • Ventilation duct protector • Lamination For Reflective Barriers |
| Real Aluminum foil with LDPE coating | Aluminium foil : 9 mic LDPE coating : 25 mic |
•Flame resistance •Excellent embossing performance •Long lasting printing |
•X.L.P.E foam pipe cover • Ventilation duct protector • Lamination For Reflective Barriers |
| PROPERTIES | PROPERTIES UNIT | TYPICAL VALUE |
| Thickness | Micron | 37 |
| Density | gr/cm3 | 1.41 for MBOPP |
| Weight | grs/sqm | 37 |
| Yield | sqm/Kg | 27.78 |
| Reflectivity | % | 75 ˜ 80 |
| Emissivity | % | 0.2 ˜ 0.3 |
| Flammability | nonflammable | |
| Lamination Temperature | Temp | 200 ˜ 250 |
| Lamination Pressure | kg/cm2 | 8 |
| PROPERTIES | PROPERTIES UNIT | TYPICAL VALUE |
| Thickness | Micron | 32 |
| Density | gr/cm3 | 1.41 for MPET |
| Weight | grs/sqm | 37 |
| Yield | sqm/Kg | 27.03 |
| Reflectivity | % | 75˜ 80 |
| Tensile Strength MD | % | 2000 |
| Emissivity | % | 0.3˜0~0.4 |
| TD | % | 2100 |
| Elongation at Break MD | % | 140 |
| TD | 130 | |
| Flammability | nonflammable | |
| Elongation | % | 6 |
| Lamination Temperature | Temp | 200 ˜ 250 |
Woven Scrim Laminated Metalized Film Like SunPro® special metalized film based RADIANT BARRIER is Reflects most of radiation heat (blocks 97% of radiation heat). It is light in weight but excellent tear-resistance & good puncture resistance. It is easy to handle during construction. It is used widely to make car cap to reflective sunshine & in roof,floor,wall,pack food for heat retaining. This combination provides excellent water vapour resistance and higher tensile strength.
Woven Scrim Laminated Metalized Film like SunPro® Radiant Barrier is economical solution for a wide range of industrial, manufacturing ,packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation ,under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products.
Fibreglass Mesh Laminated Aluminium Foil like Light Weight Fiberglass Mesh Backed Foil Insulation Finish is Reflects most of radiation heat (blocks 97% of radiation heat)
Pure Aluminium Foil Insulations Take light weight glass fibrous mesh (only 31gto 300 g) as backing and reflective aluminum foil or film as outer side, this foil mesh insulation jacketing SunPro® offer usually be installed for pipe insulation in automobile and so does to wall and roof insulation.
By applying uniquely advanced compound processing and using fibreglass as the base cloth and special fire-resistant adhesive agent, our product has the excellent properties such as the smooth surface on the aluminium foil, strong light reflection, good stretching resistance in length and breadth, non-breath ability, non-breath ability, non-water permeability, good hermetic and weather resistance.
Fibreglass Mesh Laminated Metalized Film are 97% reflecting rate, could reflect most solar energy effectively and barrier radiant effectively; light weight will not add more burden to carrier; meanwhile fantastic durable because of glass fiber mesh is strong enough; will not corrupt by moisture because of 100% Inorganic raw materials was taken to produce it; pliable and tough flexible easy to be installed from any angle.
SunPro® Fibreglass Mesh Laminated Metalized Film are Foil mesh facer mainly be used in automobile for pipe insulation, and also in HVAC system, roofs, ceilings, walls, ducts and pipes, basements, water heaters, crawl spaces, and garages in all types of residential, industrial, commercial and agricultural buildings. And it works well in areas with cool, warm, hot, and humid climates.
