SunPro® AWKA Radiant Barrier

SunPro® AWKA Radiant Barrier

Construction

7 layer co- extruded composite material made from UV & FR reinforced PP woven fabric & ESK Sack Kraft with both side highly reflective Aluminium foil.

SPECIFICATION:

  • 9 MIC AL FOIL – INSULATION GRADE
  • UV & FR PE
  • ESK SACK KRAFT
  • UV & FR PE
  • UV& FR HD WOVEN RAINFORCEMENT
  • UV & FR PE
  • 9 MIC AL FOIL – INSULATION GRADE
AWKA Radiant Barrier Manufacturer

Typical Physical Property

Property Test Method Unit Results
Grammage ISO 536 g/ sqm 170- 200 (+/-5%)
Thickness In house mic 180-200
Tensile – MD and CD ASTM D 828 N/25mm 300 - 400
Burst Strength ASTM D 774 N/25mm 315
Water Vapour Transmission ASTM F 1249 N <1
Temperature Resistant ASTM C 1263
-29~66 ℃		 - Remains Flexible
No Delamination
Emissivity ASTM E408 % 0.03
Reflectivity ASTM E408 % 97%
Working Tempreture   Celsius -50 to 110’C

Our SunPro® AWKA aluminum foil PE fabric insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits

  • Eco-friendly, environment friendly and radiant barrier.
  • Aluminum foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer Which improves the performance of the insulating material.
  • PE woven fabric provides high tensile strength and durability
  • Aluminum foil woven fabric provides an efficient, space saving, and healthy method of temperature control and energy savings.
  • Lightweight and easy handling and low cost.
  • Never use chemical bonding materials.
  • PE woven fabric can be sewed, easily installed on big building such a warehouse ceiling, factory building, super market, container liner.
  • For heavier basic weight based on order are also available.
  • Different lengths and basic weight are available.

Remarks

  • Above data are typical results and not the guaranteed performance.
  • Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
  • The products should be stored at room temperature AWKA y from wet and heat source.
  • Please do trial-application and make sure the product can serve the specific application
  • before actually put it to use.

Packaging Details:

  • Core ID: 76mm (3inch) Standard
  • length: 250 mtrs, Other lengths available On request
  • Thickness tolerance: +/-7% Maximum
  • Width size : 1220mm to 1520mm

In this product take specification above the typical physical properties..

 

Whatsapp