Call & Whatsapp us

HOME INSULATIONS

Home Insulations

SunPro™ Home InsulationsMaterial is versatile range of high performance fibre-free flexible reflective insulation for roofs, walls and floors. SunPro™ fibre-free flexible Home Insulationsoffers the following benefits for your building insulation:

  • Based on reflection means low emissivity (blocks heat and moisture)
  • Reflects most of radiation heat (blocks 97% of radiation heat)
  • Light Weight, no degradation, lasts life long
  • Easy and fast installation, No spacers required
  • Environment friendly - Non-toxic / non-carcinogenic
  • No Wire mesh needed, saves time and money

Our range of Home Insulationsproducts include Radiant Barriers or Reflective Barriers such as Woven Sack Lamination With Aluminium Foil, Aluminium Foil – Metalized Film Laminated Non Woven Fabrics, Foil Kraft Insulation Finish, Insulation Aluminum Foil Coated Fiberglass Cloth and Metalized Laminated With Woven Fabrics, Which Used in Below application

  • Roof Insulation
  • Foil Insulation
  • Pre Engineered Building Insulation
  • Thermal Insulation Materials
  • Under Roof Insulation
  • Foil Wrap Insulation
  • Aluminium Foil Insulation
  • Home Insulation
  • Metal Building Insulations materials
  • Reflective Barrier film
  • Reflective Insulation Material
  • Heat Insulation Material
  • Radient Barrier FOIL
  • HVAC Insulation
  • Aluminium Foil for Bubble Insulations
  • PE coated Aluminium Foil For Foam Insulations
  • Metalized Film for Bubble Insulations
  • PE coated METPET Film Foil For Foam Insulations
  • Coated Metalized BOPP Film For Insulation Manufacturers
  • Livestock Insulation Materials
  • Farming Insulation
  • Poultry Farm Insulation
  • Mobile House Insulation
  • Building Insulation
  • Factory Shed Insulations
  • Insulated Foil For Export Packaging
  • Fibreglass Insulations

Products 1: Single Aluminium Insulations Materials

Single Aluminium Insulations Materials like SunPro™ Radiant Barrier

An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.

Roll Size

  • Roll Width:1520 mm
  • Core I.D.: 76 m
  • Roll Length: 250 m
Property(Grammage) Test Method(ISO 536) Unit(g/sqm) Results(120–190 (+/-5%))
Tensile–MD and CD AS 4200.1 N/50mm 350 – 400 and100 –200
Elongation – MD and CD AS 4200.1 % 15 ±5
Force at break – MD and CD ASTM D 2261 N 100±20
Water Vapour – transmission rate ASTM F 1249 g/m2/day <1
Emittance of surface Aluminium foil ASTM E 408 % 97±2
Working Temperature Range - Celsius -50 to 110 ´C

Roll Size

  • Roll Width: 1520 mm
  • Roll Length: 250 m
  • Core I.D.: 76mm

Usage

SunPro™ Manufactured Single Aluminium Insulations Materials is economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation , under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products

Other Information for Single Aluminium Insulations Materials:

  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), RTGS
  • Minimum Order Quantity: 3000 Square Meter
  • Port of Dispatch: Mundra
  • Production Capacity: 500000–Sq –Mtr–Per–Month
  • Delivery Time: 1 Week After Order Conformation

Product:2 Double Aluminium Foil Insulations

SunPro™ AWA: Double sided Foil Woven Insulation Materials

Double Aluminium Foil Insulations like SunPro™ AWA&AW Technical Specifications:

Double Aluminium Foil Insulations Material An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.

Property(Grammage) Test Method(ISO 536) Unit(g/sqm) Results(150–190 (+/-5%))
Tensile–MD and CD AS 4200.1 N/50mm 350 – 400 and100 –200
Elongation – MD and CD AS 4200.1 % 15 ±5
Force at break – MD and CD ASTM D 2261 N 100±20
Water Vapour – transmission rate ASTM F 1249 g/m2/day <1
Emittance of surface Aluminium foil ASTM E 408 % 97±2
Working Temperature Range - Celsius -50 to 110 ´C

No Itch Insulations Roll Size:

  • Roll Width: 1520mm
  • Core I.D.: 76 mm
  • Roll Length: 250 m
  • Note:Special dimension on request.

Usage

Double Aluminium Foil Insulations Material are economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation ,under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products

Other Information:

  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), RTGS
  • Minimum Order Quantity: 3000 Square Meter
  • Port of Dispatch: Mundra
  • Production Capacity: 500000–Sq –Mtr–Per–Month
  • Delivery Time: 1 Week After Order Conformation

Products 3: Concrete Slab Insulations Materials

SunPro™ AW: Woven Foil Insulation Materials

Concrete Slab Insulations Materials Like SunPro™ AWA&AW Technical Specifications An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high

moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.

Property(Grammage) Test Method(ISO 536) Unit(g/sqm) Results(110–140 (+/-5%))
Tensile–MD and CD AS 4200.1 N/50mm 350 – 400 and100 –200
Elongation – MD and CD AS 4200.1 % 15 ±5
Force at break – MD and CD ASTM D 2261 N 100±20
Water Vapour – transmission rate ASTM F 1249 g/m2/day <1
Emittance of surface Aluminium foil ASTM E 408 % 97±2
Working Temperature Range - Celsius -50 to 110 ´C
  • Structure: 5 to 7 layer with FR & UV based Woven Fabric with both side al foil or Metalled film Also Available
  • Width of the roll:1520mm
  • Core: 3 inch.
  • Length : According to the customers' demand.
  • Colour: silver, white, black, deep blue, light blue, orange.

Usage

Concrete Slab Insulations are economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products

Other Information:

  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), RTGS
  • Minimum Order Quantity: 3000 Square Meter
  • Port of Dispatch: Mundra
  • Production Capacity: 500000–Sq –Mtr–Per–Month
  • Delivery Time: 1 Week After Order Conformation

Products 4: Mobile House Insulation Materials

Mobile House Insulation Materials like SunPro™ ANWA are Reflects most of radiation heat (blocks 97% of radiation heat)

Mobile House Insulation Materials, Apply Nonwoven fabric which is a fabric-like material made from long fibbers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

SunPro™ ANWA: Non woven Based Radiant Barrier

  • Structure: 5 to 7 layer with FR & UV based Non Woven Fabric with both side al foil or Metalled filmAlso Available
  • Width of the roll: 1520mm
  • Core: 3 inch.
  • Length : According to the customers' demand.
  • Colour: silver, white, black, deep blue, light blue, orange.

Mobile House Insulation Materials are light in weight, excellent tear-resistance & good puncture resistance & excellent water vapour resistance andhigher tensile strength. It is easy to handle during construction. anti-aging, peel strength, and printable

Insulation Usage:

Mobile House Insulation Materials are used widely to make car cap to Reflective Sunshine & in Roof, floor, wall, pack food for heat retaining, medical & sanitary, industry & agriculture, construction & daily-used products such as the agricultural plant covers, roof waterproof material, disposable items for medical and industrial applications, liners for furniture, packing material, shopping bags, suit and garment cover, industrial protective coveralls, garment accessory materials, bed articles, medical and sanitary articles as well as family and hotel consume articles, especially for heat insulation, thermal insulation and construction and other fields.

Other Packaging Usage:

Metalized film / Al Foil Laminated non woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage, well tensile strength, aluminium coating is well-proportioned has very high lusted degree, light reflectivityreach 98%, suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging...

Products 5: Building Insulations

Building Insulations like SunPro™ ANW & SunPro™ ANWA are Reflects most of radiation heat (blocks 97% of radiation heat) . Apply Nonwoven fabric which is a fabric-like material made from long fibbers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

  • Structure: 5 to 7 layer with FR & UV based Non Woven Fabric with both side al foil or Metalled filmAlso Available
  • Width of the roll: 1520 mm
  • Core: 3 inch.
  • Length : According to the customers' demand.
  • Colour: silver, white, black, deep blue, light blue, orange.

Building InsulationsMaterial is light in weight, excellent tear-resistance & good puncture resistance & excellent water vapour resistance and higher tensile strength. It is easy to handle during construction. Anti-aging, peel strength, and printable

Other Packaging Usage

Building Insulations Metalized film / Al Foil Laminated non woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage, well tensile strength, aluminium coating is well-proportioned has very high lusted degree, light reflectivity reach 98%, suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging...

Products 6: Heat Resistance Insulation Foil

Aluminium heat Insulation For Roof like Light Weight Fibreglass Mesh Backed Foil Insulation Finish is Reflects most of radiation heat (blocks 97% of radiation heat)

Aluminium heat Insulation For Roof Take light weight glass fibrous mesh (only 31gto 300 g) as backing and reflective aluminium foil or film as outer side, this foil mesh insulation jacketing SunPro™ offer usually be installed for pipe insulation in automobile and so does to wall and roof insulation.

  • Alumimun Foil coated fibreglass cloth
  • non-breath ability,
  • Insulation
  • good hermetic and weather resistance.

By applying uniquely advanced compound processing and using fibreglass as the base cloth and special fire-resistant adhesive agent, our product has the excellent properties such as the smooth surface on the aluminium foil, strong light reflection, good stretching resistance in length and breadth, non-breath ability, non-breath ability, non-water permeability, good hermetic and weather resistance.

Features:

Aluminium heat Insulation For Roof are 97% reflecting rate, could reflect most solar energy effectively and barrier radiant effectively; light weight will not add more burden to carrier; meanwhile fantastic durable because of glass fiber mesh is strong enough; will not corrupt by moisture because of 100% Inorganic raw materials was taken to produce it; pliable and tough flexible easy to be installed from any angle.

Applications:

SunPro™ Aluminium heat Insulation For Roof are Foil mesh facer mainly be used in automobile for pipe insulation, and also in HVAC system, roofs, ceilings, walls, ducts and pipes, basements, water heaters, crawl spaces, and garages in all types of residential, industrial, commercial and agricultural buildings. And it works well in areas with cool, warm, hot, and humid climates.

Size:

  • Roll Width: 1520 mm
  • Roll Length: 250 m
  • Core I.D.: 76mm

Other Information:

  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), RTGS
  • Minimum Order Quantity: 3000 Square Meter
  • Port of Dispatch: Mundra
  • Production Capacity: 500000–Sq –Mtr–Per–Month
  • Delivery Time: 1 Week After Order Conformation

Products 7: Aluminium Heat Insulation For Wall

Aluminium heat Insulation For Wall Like SunPro™ MET PET BASED RADIANT BARRIER is Reflects most of radiation heat (blocks 97% of radiation heat).It is light in weight but excellent tear-resistance & good puncture resistance. It is easy to handle during construction. It is used widely to make car cap to reflective sunshine & in roof,floor,wall,pack food for heat retaining. This combination provides excellent water vapour resistance and higher tensile strength.

Aluminium heat Insulation For Wall Characteristics:

  • Perfect uniformity, test on line in process. High barrier
  • The material provides excellent insulation: reflects up to 97% of radiant energy in addition to reflective sheeting resisting other types of heat transfer from conduction, convection, and radiation. The side of metalized special film an effective barrier against moisture, air currents and vapors.
  • Clean, thin and light weight
  • Outstanding safety and environmentally friendly.
  • Easy to install, high efficiency.
  • Cost effective and versatile.

Usage:

Aluminium heat Insulation For Wall like SunPro™ Radiant Barrier is economical solution for a wide range of industrial, manufacturing ,packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation ,under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products.

Aluminium heat Insulation For Wall Roll Size:

  • Roll Width: 1520 mm
  • Roll Length: 250 m
  • Core I.D.: 76mm
  • Special dimension on request

Products 8: Decorative Insulation Materials

Decorative Insulation Materials Reflects most of radiation heat (blocks 97% of radiation heat). It is light in weight but excellent tear-resistance & good puncture resistance. It is easy to handle during construction. It is used widely to make car cap to reflective sunshine & in roof,floor,wall,pack food for heat retaining. This combination provides excellent water vapour resistance and higher tensile strength

Decorative Insulation Materials Characteristics:

  • Perfect uniformity, test on line in process. High barrier
  • The material provides excellent insulation: reflects up to 97% of radiant energy in addition to reflective sheeting resisting other types of heat transfer from conduction, convection, and radiation. The side of metalized special film an effective barrier against moisture, air currents and vapors.
  • Clean, thin and light weight
  • Outstanding safety and environmentally friendly.
  • Easy to install, high efficiency.
  • Cost effective and versatile.

Decorative Insulation Materials Usage:

Decorative Insulation Materials is economical solution for a wide range of industrial, manufacturing ,packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation ,under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products.

Roll Size:

  • Roll Width: 1520 mm
  • Roll Length: 250 m
  • Core I.D.: 76mm
  • Special dimension on request

Products 9: Reflective Barrier Supplier

Reflective Barrier like Light Weight Fiberglass Mesh Backed Foil Insulation Finish are Reflects most of radiation heat (blocks 97% of radiation heat).Take light weight glass fibrous mesh (only 31gto 300 g) as backing and reflective aluminum foil or film as outer side, this foil mesh insulation jacketing SunPro™ offer usually be installed for pipe insulation in automobile and so does to wall and roof insulation.

By applying uniquely advanced compound processing and using fibreglass as the base cloth and special fire-resistant adhesive agent, our product has the excellent properties such as the smooth surface on the aluminium foil, strong light reflection, good stretching resistance in length and breadth, non-breath ability, non-breath ability, non-water permeability, good hermetic and weather resistance.

Features:

SunPro™ Reflective Barrier are 97% reflecting rate, could reflect most solar energy effectively and barrier radiant effectively; light weight will not add more burden to carrier; meanwhile fantastic durable because of glass fiber mesh is strong enough; will not corrupt by moisture because of 100% Inorganic raw materials was taken to produce it; pliable and tough flexible easy to be installed from any angle.

Application:

Reflective Barrier Foil mesh facer mainly be used in automobile for pipe insulation, and also in HVAC system, roofs, ceilings, walls, ducts and pipes, basements, water heaters, crawl spaces, and garages in all types of residential, industrial, commercial and agricultural buildings. And it works well in areas with cool, warm, hot, and humid climates.

Roll Size:

  • Roll Width: 1520 mm
  • Roll Length: 250 m
  • Core I.D.: 76mm