Call & Whatsapp us

FACTORY SHED INSULATION

Factory Shed Insulations

SunPro™ Factory Shed Insulation is versatile range of high performance fibre-free flexible reflective insulation for roofs, walls and floors. SunPro™ fibre-free flexible Factory Shed Insulation offers the following benefits for your building insulation:

  • Based on reflection means low emissivity (blocks heat and moisture)
  • Reflects most of radiation heat (blocks 97% of radiation heat)
  • Light Weight, no degradation, lasts life long
  • Easy and fast installation, No spacers required
  • Environment friendly
  • No Wire mesh needed, saves time and money

Our range of Livestock Insulation Foil products include Radiant Barriers or Reflective Barriers such as Woven Sack Lamination With Aluminium Foil, Aluminium Foil - Metalized Film Laminated Non Woven Fabrics, Foil Kraft Insulation Finish, Insulation Aluminum Foil Coated Fiberglass Cloth and Metalized Laminated With Woven Fabrics, Which Used in Below application

  • Roof Insulation
  • Foil Insulation
  • Pre Engineered Building Insulation
  • Thermal Insulation Materials
  • Under Roof Insulation
  • Foil Wrap Insulation
  • Aluminium Foil Insulation
  • Home Insulation
  • Metal Building Insulations materials
  • Reflective Barrier film
  • Reflective Insulation Material
  • Heat Insulation Material
  • Radient Barrier FOIL
  • HVAC Insulation
  • Aluminium Foil for Bubble Insulations
  • PE coated Aluminium Foil For Foam Insulations
  • Metalized Film for Bubble Insulations
  • PE coated METPET Film Foil For Foam Insulations
  • Coated Metalized BOPP Film For Insulation Manufacturers
  • Livestock Insulation Materials
  • Farming Insulation
  • Poultry Farm Insulation
  • Mobile House Insulation
  • Building Insulation
  • Factory Shed Insulations
  • Insulated Foil For Export Packaging
  • Fibreglass Insulations

Products 1: PEB Insulation Materials

PEB Insulation Materials like SunPro™ Brand Radiant Barrier An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.

Property(Grammage) Test Method(ISO 536) Unit(g/sqm) Results(120–190 (+/-5%))
Tensile–MD and CD AS 4200.1 N/50mm 350 – 400 and100 –200
Elongation – MD and CD AS 4200.1 % 15 ±5
Force at break – MD and CD ASTM D 2261 N 100±20
Water Vapour – transmission rate ASTM F 1249 g/m2/day <1
Emittance of surface Aluminium foil ASTM E 408 % 97±2
Working Temperature Range - Celsius -50 to 110 ´C

PEB Insulation Materials Roll Size:

  • Roll Width: 1520 mm
  • Core I.D.: 76mm
  • Roll Length: 250 m
  • Note: Special dimension on request.

Usage

PEB Insulation Materials is economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products

Other Information:

  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), RTGS
  • Minimum Order Quantity: 3000 Square Meter
  • Port of Dispatch: Mundra
  • Production Capacity: 500000–Sq –Mtr–Per–Month
  • Delivery Time: 1 Week After Order Conformation

Products 2: 2 Side Pure Aluminium Foil Insulation Materials

2 Side Pure Aluminium Foil Insulation Materials like SunPro™ AWA & AW Technical Specifications:

2 Side Pure Aluminium Foil Insulation Materials An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.

Property(Grammage) Test Method(ISO 536) Unit(g/sqm) Results(120–190 (+/-5%))
Tensile–MD and CD AS 4200.1 N/50mm 350 – 400 and100 –200
Elongation – MD and CD AS 4200.1 % 15 ±5
Force at break – MD and CD ASTM D 2261 N 100±20
Water Vapour – transmission rate ASTM F 1249 g/m2/day <1
Emittance of surface Aluminium foil ASTM E 408 % 97±2
Working Temperature Range - Celsius -50 to 110 ´C

2 Side Pure Aluminium Foil Insulation Materials Roll Size:

  • Roll Width: 1520 mm
  • Roll Length: 60m to 1500m
  • Core I.D.: 76mm

Usage:

2 Side Pure Aluminium Foil Insulation Materials are economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products

Other Information:

  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), RTGS
  • Minimum Order Quantity: 3000 Square Meter
  • Port of Dispatch: Mundra
  • Production Capacity: 500000–Sq –Mtr–Per–Month
  • Delivery Time: 1 Week After Order Conformation

Products 3: Radiant Barrier Foil

Radiant Barrier Foil Like SunPro™ AWA & AW Technical Specifications

An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.

Property(Grammage) Test Method(ISO 536) Unit(g/sqm) Results(120–190 (+/-5%))
Tensile–MD and CD AS 4200.1 N/50mm 350 – 400 and100 –200
Elongation – MD and CD AS 4200.1 % 15 ±5
Force at break – MD and CD ASTM D 2261 N 100±20
Water Vapour – transmission rate ASTM F 1249 g/m2/day <1
Emittance of surface Aluminium foil ASTM E 408 % 97±2
Working Temperature Range - Celsius -50 to 110 ´C

Construction

5 to 7 layer co- extruded composite material made from UV & FR reinforced PP woven fabric with both side highly reflective Aluminium foil

  • Width of the roll: 1520 mm
  • Core: 3 inch.
  • Length : According to the customers' demand.
  • Colour: silver, white, black, deep blue, light blue, orange.

Usage:

Usage: Radiant Barrier Foils are economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products

Other Information:

  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), RTGS
  • Minimum Order Quantity: 3000 Square Meter
  • Port of Dispatch: Mundra
  • Production Capacity: 500000–Sq –Mtr–Per–Month
  • Delivery Time: 1 Week After Order Conformation

Products 4: Heat Insulation Materials For Roof And Wall

Heat Insulation Materials for Roof and Wall like SunPro™ ANWA are Reflects most of radiation heat (blocks 97% of radiation heat)

Heat Insulation Materials for Roof and Wall, Apply Nonwoven fabric which is a fabric-like material made from long fibbers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

Construction

5 to 7 layer co extruded composite material made from UV & FR reinforced PP non woven fabric with both side highly reflective Aluminium foil

  • Structure: 5 to 7 layer with FR & UV based Non Woven Fabric with both side al foil or Metalled filmAlso Available
  • Width of the roll: 1520 mm
  • Core: 3 inch.
  • Length : According to the customers' demand.
  • Colour: silver, white, black, deep blue, light blue, orange.

Heat Insulation Materials for Roof and Wall is light in weight, excellent tear-resistance & good puncture resistance & excellent water vapour resistance and higher tensile strength. It is easy to handle during construction, anti-aging, peel strength, and printable

Insulation Usage:

Heat Insulation Materials for Roof and Wall are used widely to make car cap to Reflective Sunshine & in Roof, floor, wall, pack food for heat retaining, medical & sanitary, industry & agriculture, construction & daily-used products such as the agricultural plant covers, roof waterproof material, disposable items for medical and industrial applications, liners for furniture, packing material, shopping bags, suit and garment cover, industrial protective coveralls, garment accessory materials, bed articles, medical and sanitary articles as well as family and hotel consume articles, especially for heat insulation, thermal insulation and construction and other fields.

Other Packaging Usage:

Metalized film / Al Foil Laminated non woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage, well tensile strength, aluminium coating is well-proportioned has very high lusted degree, light reflectivityreach 98%, suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging...

Products 5: Under Roof Insulations

Under Roof Insulations like SunPro™ ANW & SunPro™ ANWA are Reflects most of radiation heat (blocks 97% of radiation heat). Apply Nonwoven fabric which is a fabric-like material made from long fibbers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

5 to 7 layer co extruded composite material made from UV & FR reinforced PP non woven fabric with both side highly reflective Aluminium foil

  • Width of the roll: 1520 mm
  • Core: 3 inch.
  • Length : According to the customers' demand.
  • Colour: silver, white, black, deep blue, light blue, orange.

Heat Insulation Materials for Roof and Wall is light in weight, excellent tear-resistance & good puncture resistance & excellent water vapour resistance and higher tensile strength. It is easy to handle during construction, anti-aging, peel strength, and printable

Feature:

An Under Roof Insulations material is light in weight, excellent tear-resistance & good puncture resistance & excellent water vapour resistance and higher tensile strength. It is easy to handle during construction. Anti-aging, peel strength, and printable

Other Packaging Usage:

Under Roof Insulations like Metalized film / Al Foil Laminated non woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage, well tensile strength, aluminium coating is well-proportioned has very high lusted degree, light reflectivity reach 98%, suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging...

Products 6: Reflective Insulation Materials

Reflective Insulation Materials like Light Weight fibreglass Mesh Backed Foil Insulation Finish is Reflects most of radiation heat (blocks 97% of radiation heat)

Reflective Insulation Materials Take light weight glass fibrous mesh (only 31gto 300 g) as backing and reflective aluminium foil or film as outer side, this foil mesh insulation jacketing SunPro™ offer usually be installed for pipe insulation in automobile and so does to wall and roof insulation.

  • Alumimun Foil coated fibreglass cloth
  • non-breath ability,
  • Insulation
  • good hermetic and weather resistance.

By applying uniquely advanced compound processing and using fibreglass as the base cloth and special fire-resistant adhesive agent, our product has the excellent properties such as the smooth surface on the aluminium foil, strong light reflection, good stretching resistance in length and breadth, non-breath ability, non-breath ability, non-water permeability, good hermetic and weather resistance.

Feature:

Reflective Insulation Materials are 97% reflecting rate, could reflect most solar energy effectively and barrier radiant effectively; light weight will not add more burden to carrier; meanwhile fantastic durable because of glass fiber mesh is strong enough; will not corrupt by moisture because of 100% Inorganic raw materials was taken to produce it; pliable and tough flexible easy to be installed from any angle.

Applications:

SunPro™ Reflective Insulation Materials are Foil mesh facer mainly be used in automobile for pipe insulation, and also in HVAC system, roofs, ceilings, walls, ducts and pipes, basements, water heaters, crawl spaces, and garages in all types of residential, industrial, commercial and agricultural buildings. And it works well in areas with cool, warm, hot, and humid climates.

Size:

  • Roll Width: 1520 mm
  • Roll Length: 250 m
  • Core I.D.: 76mm

Other Information:

  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), RTGS
  • Minimum Order Quantity: 3000 Square Meter
  • Port of Dispatch: Mundra
  • Production Capacity: 500000–Sq –Mtr–Per–Month
  • Delivery Time: 1 Week After Order Conformation

Products 7: Pre Engineering Building Insulation Materials

Pre Engineering Building Insulation Materials Like SunPro™ specialized metalized film BASED RADIANT BARRIER is Reflects most of radiation heat (blocks 97% of radiation heat). It is light in weight but excellent tear-resistance & good puncture resistance. It is easy to handle during construction. It is used widely to make car cap to reflective sunshine & in roof,floor,wall,pack food for heat retaining. This combination provides excellent water vapour resistance and higher tensile strength.

Pre Engineering Building Insulation Materials Characteristics:

  • Perfect uniformity, test on line in process. High barrier
  • The material provides excellent insulation: reflects up to 97% of radiant energy in addition to reflective sheeting resisting other types of heat transfer from conduction, convection, and radiation. The side of metalized special film an effective barrier against moisture, air currents and vapors.
  • Clean, thin and light weight
  • Outstanding safety and environmentally friendly.
  • Easy to install, high efficiency.
  • Cost effective and versatile.

Usage:

Pre Engineering Building Insulation Materials like SunPro™ Radiant Barrier is economical solution for a wide range of industrial, manufacturing packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products.

Pre Engineering Building Insulation Materials Types:

  • Metalized Special Film ⁄PE woven fabric/Metalized Specialized film.
  • Metalized Special Film⁄PE/PE woven fabric.
  • Metalized Specialized film⁄PE/PE woven fabric/PE

Roll Size:

  • Roll Width: 1520 mm
  • Roll Length: 250 m
  • Core I.D.: 76mm
  • Special dimension on request

Products 9: Fibreglass Insulations

Fibreglass Insulations like Light Weight Fiberglass Mesh Backed Foil Insulation Finish are Reflects most of radiation heat (blocks 97% of radiation heat).Take light weight glass fibrous mesh (only 31gto 300 g) as backing and reflective aluminum foil or film as outer side, this foil mesh insulation jacketing SunPro™ offer usually be installed for pipe insulation in automobile and so does to wall and roof insulation.

  • Alumimun Foil coated fibreglass cloth
  • non-breath ability,
  • Insulation
  • good hermetic and weather resistance.

By applying uniquely advanced compound processing and using fibreglass as the base cloth and special fire-resistant adhesive agent, our product has the excellent properties such as the smooth surface on the aluminium foil, strong light reflection, good stretching resistance in length and breadth, non-breath ability, non-breath ability, non-water permeability, good hermetic and weather resistance.

Features:

Fibreglass Insulations are 97% reflecting rate, could reflect most solar energy effectively and barrier radiant effectively; light weight will not add more burden to carrier; meanwhile fantastic durable because of glass fiber mesh is strong enough; will not corrupt by moisture because of 100% Inorganic raw materials was taken to produce it; pliable and tough flexible easy to be installed from any angle.

Application:

Fibreglass Insulations Foil mesh facer mainly be used in automobile for pipe insulation, and also in HVAC system, roofs, ceilings, walls, ducts an pipes, basements, water heaters, crawl spaces, and garages in all types of residential, industrial, commercial and agricultural buildings. And it works well in areas with cool, warm, hot, and humid climates.

Size:

  • Roll Width: 1520 mm
  • Roll Length: 250 m
  • Core I.D.: 76mm